Security measures to be taken for chandeliers and ceiling lights and spotlights

Chandelier installation

Chandeliers, also referred to by the names of hanging wire lamps or chandeliers hanging from chains are kind of lamp used frequently in decor for homes. They are commonly utilized in living rooms, and other areas with plenty of space.

* Fixing chandeliers

Begin by drawing the points to drill for chandeliers Use an impact tool to make holes, then drive expansion screws into the holes.

Crystal chandeliers tend to be heavy, and therefore must be installed and fixed using steel screws for expansion, iron hanging plates, and hooks to anchor the ceiling and then join the base of the chandelier in order that the chandelier can be erected more securely.

* Chandelier connection

Screw the bald screws on Install the base, join the power cable, then wrap the exposed area with insulating tape, join the suspension rod with the base and then install the lampshade and the bulb that will be used to light the chandelier.

Do not place the wire ends of both wires under an object of metal to avoid short circuits or risk.

* Installation procedures

1.) It is not recommended to put chandeliers in rooms less than 2.4m because the room can appear confined, insufferable and even suffocating.

2.) The chassis must be secured securely and safely. If the lamp weighs more than 3kg, pre-buried hooks or expansion bolts must be used to secure the bracket on the roof.

3.) Verify that the connections of the hanger is secure. It should have no less than two bolts or screws for fixing each lamp. If the size of the insulating plate is less than 75mm one screw or bolt is sufficient for fixing.

Ceiling lamp installation

Ceiling lamps are lamps that sit near to the roof. They’re generally flat, like they are affixed to the ceiling. They are typically utilized in offices, homes and entertainment venues.

* Fixing ceiling lamps

Set the body on top of the ceiling and mark the location of the hole and then drill the hole using an impact drill. then fill in the hole with fixings, such as extension screws (the bearing capacity of the fixings must be equal to that of the lamps weight). Be aware that the cord for power needs to be able to pass through the body of the lamp.

* Ceiling light wiring

The wires that are reserved for the roof over the base. Fix the base using screws and then align those screw holes.

After fixing the wires on the base, connect the the base and wrap the exposed portions of the wires in insulating tape, and then install lampshade and lamp tubes. the lampshade.

* Installation safety precautions

1.) Be aware of the safety drill standard for lamps that are fixed. in the absence of any specific needs, the openings on the walls are usually 6 mm. If you are installing the lamp yourself with the impact drill make sure to fit a matching drill bit. Be aware of the drilling depth as you drill and ensure that the screws for expansion are completely in place.

2.) Make sure you are aware of the security that is the line of power Crystal chandeliers are typically heavy, therefore they should be installed and fixed using steel screws for expansion, iron hanging plates and hooks that anchor the ceiling and then connect the base of the chandelier in order that the chandelier is able to be put in place more securely.

Spotlight installation

Spotlights are a type of lighting lamp with no main lights and fixed scales. They can be adjusted in any angle and the effects of lighting are constantly changing. They are generally located in bedrooms, entrances or bathrooms, balconies, kitchens and more.

* Reserved spot in the spotlight

Spotlights are typically installed in embedded structures. In general, lines are reserved in accordance with the plan of decoration and slots with no spotlights are accordingly reserved.

It is either an integrated spotlight, or track spotlight, the distance between lights should be set between 80cm and 120cm to ensure that there isn’t reflection and lighting intensity in the area won’t be diminished.

* Spotlight connection

Install the base into the spot that’s empty in the spotlight, then pull out the wires, attach the screws, and then connect the wire ends be sure to perform the insulation treatment. Finally, connect the spotlight component.

* Installation procedures

1.) Be aware that the spotlight circuit has to be fitted using a transformer. This will prevent explosions caused by unstable voltage. When installing spotlights, ensure to set up a transformer or buy spotlights that come that come with transformers.

2.) Be aware of the amount and alignment of spotlights: Use of spotlights isn’t restricted. They can be used in isolation or in conjunction, based on the area used in addition to the dimension of the object. However, do not create any light pollution to the space and even the most stunning lights are best used in moderation.

Several details need attention

1.) If the total weight is more than 3 kilograms, the chandelier should be inserted into the original top, and then secured using bolts.

2.) The wall lamps usually placed at a height of 1.8-2.0 meters above the ground. A lamp that is too high or low will impact the look of the space.

3.) Ceiling lamps must be inserted with the installation elements in the ceiling, or on a hollow slab floor and secured with bolts.

4.) Soft chandeliers made of wire or long-poles are required to be linked to the top by a chain for hanging to support its weight since the lamp’s wire is not able to support the weight of the lamp.

5) Downlights must be 4 millimeters smaller than the outside cover of the lamp on top of the lamp to make it easier for the installation and replacement.

6.) Reflectors, spotlights, and spot lights need to be positioned flat and not bent. The two kinds of lights shouldn’t be placed in the same horizontal direction.